Use the drop down menu to see specific districts.
Residential Districts: R6B
Overview
R1-1, R1-2
R2
R2A
R2X
R3-1
R3-2
R3A
R3X
R4
R4 Infill
R4-1
R4A
R4B
R5
R5 Infill
R5A
R5B
R5D
R6
R6A
R6B
R7-1, R7-2
R7A
R7B
R7D
R7X
R8
R8A
R8B
R8X
R9
R9A
R9X
R10
R10A
R10X
Inclusionary Housing
Overview
C1 & C2 (Overlays)
C1 & C2 (Other)
C3 & C3A
C4
C5
C6
C7
C8
Overview
M1
M2
M3
Overview
Bronx
Brooklyn
Manhattan
Queens
Staten Island
R6B districts are often traditional row
house districts, designed to preserve
the scale and harmonious streetscape of
neighborhoods developed during the 19th
century with four-story attached buildings.
Many of these houses are set back from the
street by the stoops and small front yards
that are typical of Brooklyn's "brownstone"
neighborhoods—Park Slope or Boerum
Hill, for example.
The
FAR of 2.0 and the mandatory
Quality Housing regulations also accommodate
apartment buildings at a similar four- to
five-story scale. The
base height of a
new building before
setback must be
between 30 and 40 feet; the maximum
building height is 50 feet. To maintain
the traditional streetscape,
curb cuts are
prohibited on lots narrower than 40 feet
and the front wall of a new building, on
any lot up to 50 feet wide, must be as deep
as one adjacent front wall but no deeper
than the other. Off-street parking is not
allowed in front of a building and the area
between the front wall and the
street line must be landscaped. Parking is required for
50% of dwelling units, or waived if five or
fewer spaces are required.
View Larger Image
Park Slope, Brooklyn
Boerum Hill, Brooklyn
Park Slope, Brooklyn